Categories
Assignment Help

A chemical or physical change that takes in heat from its surroundings is an exothermic process an explosion an endothermic process a phase change

[ad_1]

A chemical or physical change that takes in heat from its surroundings is an exothermic process an explosion an endothermic process a phase change

[ad_2]

Categories
Assignment Help

Think about an igneous rock at the top of a mountain. If this rock went through the whole rock cycle, number the steps that would follow. 1. Step 1 Regolith is dumped into some type of reservoir, usually water, by deposition. 2. Step 2 Metamorphic rock begins to melt back into magma. 3. Step 3 Regolith is transported or eroded by rain or wind. 4. Step 4 Rock is broken down into regolith by weathering. 5. Step 5 Layers deposited begin to compact and cement together to form sedimentary rock. 6. Step 6 Sedimentary rock is buried deeper into the earth’s crust. The intense heat and pressure begins metamorphism and the rock turns into metamorphic rock. 7. Step 7 Magma is resurfaced from volcanic activity, cools, and becomes igneous rock.

[ad_1]

Answer:

The correct sequence according to the question is steps- 4→1→3→5→6→2→7.

Explanation:

The given steps show that how the rocks are recycled from one form to another form due to certain factors like weathering over geological time scale which was explained by James Hutton and he termed this concept as the rock cycle.

The steps of the rock cycle in sequence according to the question are:

1.  Breakdown of rock by weathering into regolith- step 4

2.  Dumping and deposition of regolith in a reservoir- step  1

3.  Erosion and transportation of regolith by rain or wind- step  3

4. Cementing of the deposited layer to form sedimentary rock- step  5

5. Conversion of sedimentary rock to a metamorphic rock due to intense heat and pressure- step 6

6. Conversion of  metamorphic rocks to magma due to the melting of metamorphic rocks-
step 2

7. Conversion of magma to igneous rocks due to volcanic activities and cooling of magma-  step 7

Therefore sequence according to the question is steps- 4→1→3→5→6→2→7 is correct.

[ad_2]

Categories
Assignment Help

Miguel has been working hard at football practice he is experiencing and rapid heart rate warm dry skin nausea vomiting headache confusion in a high fever 140°F it is very likely that Miguel is suffering from what heat illness? Heat cramps? Heat exhaustion? Heat stress? Heat stroke?

[ad_1]

Answer:

Heat stroke

Explanation:

Since Miguel is out at the field under the hot sun working hard practicing football, it is likely that Miguel is exhausted and very much tired. The water content in his body has decreased drastically. And also since it is very hot, Miguel is likely to suffer from heat stroke as his body temperature has increased at a rapid rate and he is suffering from fever at 140° F, which is a clear sign of heat stroke.

       Heat stroke is a most severe heat attach where the body temperature rises upto 140° F or 40° C or higher. It also leads to body cramps, vomiting and severe headache, increased pulse rate. This is very dangerous and may lead to death. Therefore it is very important to take medical care as soon as possible.

[ad_2]

Categories
Assignment Help

The process that decomposes alkanes into alkenes and alkynes using heat and a catalyst is called __________.

[ad_1]

Answered by answersmine AT 22/10/2019 – 05:22 AM

The process is called CATALYTIC CRACKING. Cracking is the process by which complex organic compounds or long chain hydrocarbons are broken down into simpler molecules by the breaking of the carbon carbon bonds which the molecules possess. There are different type of cracking.

Post your answer

[ad_2]

Categories
Assignment Help

Which is an example of how the peripheral nervous system helps the body maintain its internal environment? Muscles produce keratin so that hair can grow stronger. Sweat glands break down the food that is consumed. Muscles contract rapidly to produce heat on a cold day. The brain recalls information to help take a test.

[ad_1]

Answer:

The integumentary system covers the surface of the body is true about the integumentry system.

Explanation:

The integumentary system includes the skin, nails, glands, hairs, and nerves. Its main role is to act as a barrier to protect the body from the outside environment. It also retains body fluids, regulates body temperature, eliminates waste products, and protects against disease.

The integumentary system is the largest organ in the body that covers the surface of the body.

Thus, The integumentary system covers the surface of the body is the true statement about the integumentry system.

[ad_2]

Categories
Assignment Help

Ocean currents are caused by Waves, hurricanes, wind, heat PLEASEEEE HURRYYYY

[ad_1]

The inflammatory response (inflammation) occurs when tissues are injured by bacteria, trauma, toxins, heat, or any other cause. The damaged cells release chemicals including histamine, bradykinin, and prostaglandins. These chemicals cause blood vessels to leak fluid into the tissues, causing swelling. 

B. pain, swelling, and a local rise in temperature. 

[ad_2]

Categories
Assignment Help

Glass is a _____ conductor of heat.

[ad_1]

Glass is a _____ conductor of heat.

[ad_2]

Categories
Assignment Help

A metal sample is heated and placed into the water in a calorimeter at room temperature. Which statement best describes how the calorimeter can be used to determine the specific heat capacity of the metal sample? Energy transfers to the metal from the water and calorimeter until they are all at room temperature. Energy transfers from the metal to the water and calorimeter until they are all at room temperature. Energy transfers to the metal from the water and calorimeter until they all reach a single temperature. Energy transfers from the metal to the water and calorimeter until they all reach a single temperature.

[ad_1]

This problem is to apply Roult’s Law.

Roult’s Law states that the vapor pressure, p, of a solution of a non-volatile solute is equal to the vapor pressure of the pure solvent, Po solv, times the mole fraction of the solvent, Xsolv

p = Xsolv * Po sol

X solv = number of moles of solvent / number of moles of solution

The solvent is water and the solute (not volatile) is glycerin.

Number of moles = mass in grams / molar mass

mass of water = 132 ml * 1 g/ml = 132 g

molar mass of water = 18 g/mol

=> number of moles of water = 132 g / 18 g/mol = 7.33333 mol

mass of glycerin = 27.2 g

molar mass of glycerin:, C3H8O3: 3 * 12 g/mol + 8 * 1 g/mol + 3*16 g/mol = 92 g/mol

number of moles of glycerin = 27.2g / 92 g/mol = 0.29565

total number of moles = 7.33333 moles + 0.29565 moles = 7.62898 moles

=> X solv = 7.33333 / 7.62898 = 0.96125

=> p = 0.96125 * 31.8 torr ≈ 30.57 torr ≈ 30.6 torr.

Answer: 30.6 torr

[ad_2]

Categories
Assignment Help

The addition of 435.2 j of heat is required to raise the temperature of 3.4 g of olive oil from 21?c to 85?c. what is the specific heat of the olive oil?

[ad_1]

The addition of 435.2 j of heat is required to raise the temperature of 3.4 g of olive oil from 21?c to 85?c. what is the specific heat of the olive oil?

[ad_2]

Categories
Assignment Help

You have a dark-colored piece of cloth and a light-colored piece of cloth. what would be the best way to determine which piece of cloth absorbs the most heat?

[ad_1]

You have a dark-colored piece of cloth and a light-colored piece of cloth. what would be the best way to determine which piece of cloth absorbs the most heat?

[ad_2]

Categories
Assignment Help

The specific heat of granite is 800 J/(kg·°C). How much heat does it take to raise 1 kg of granite 4°C?

[ad_1]

The specific heat of granite is 800 J/(kg·°C). How much heat does it take to raise 1 kg of granite 4°C?

[ad_2]

Categories
Assignment Help

Instructions:Select the correct answer. Why does a solid change to liquid when heat is added? A-The spacing between particles decreases. B-Particles lose energy. C-The spacing between particles increases. D-The temperature decreases.

[ad_1]

There are two systems in the human body that are responsible for the coordination between the functions of different systems to achieve the unity of the living organism’s body. These two systems are the nervous system and the endocrine system. The action of the nervous system is fast and takes a short time, while the action of the endocrine system is slow and takes a long time.

The functional unit of the nervous system is the nerve cell or the neuron. The neuron consists of a cell body and the axon. The cell body starts with the dendrites that receive the messages or the impulses from other neurons or from different sense organs or receptors. These impulses are then transmitted through the cell body. The cell body contains a nucleus and different organelles which help the nerve cell to perform its functions. The nerve impulse is then transmitted to the axon.

The axon is an extension from the cell body. There are some cells called Schwan cells that secrete a myelin sheath to insulate the axon from the surrounding medium. The insulated axons have more ability to conduct the impulses than non-insulated axons. The axon ends with the terminal arborizations. The terminal arborizations of a nerve cell connect to the dendrites of the next cell or to the afferent organ. The gaps between the dendrites and the terminal arborizations are called the synapses.

The nerve impulse is an electrochemical phenomenon i.e. an electrical phenomenon with a chemical nature. The membrane of the axon acts as a barrier between an outside positively charged medium and an inside negatively charged medium. This makes a potential difference of  -70mV. This state is called the resting potential. When the membrane is subjected to a stimulus, the positive charges enter to inside and the negative charges exit to the outside. The potential difference now becomes +40mV. This state is called the depolarization state. The point of stimulation acts as a new stimulus for the next point and so on. The membrane sooner gains its permeability again and the positive charges return to the outside and the negative charges to inside. This state is called repolarization.

The nerve impulse reaches the synapse. There are some neurotransmitters that are excited by the nerve impulse coming and carry the message across the membrane. Some receptors receive theses neurotransmitters on the dendrites of the next neuron. These receptors act as a stimulus for the new cell.

[ad_2]

Categories
Assignment Help

50 POINTS AND WILL MAKE BRAINLEIST Describe the relationship between heat capacity and the temperature change of a swimming pool, Lake Michigan, and a glass of water exposed to the same amount of sunlight for the same 12 hour time period. (Hint: would one change more than the others, would any remain unchanged, or would the all remain the same)

[ad_1]

This problem is to apply Roult’s Law.

Roult’s Law states that the vapor pressure, p, of a solution of a non-volatile solute is equal to the vapor pressure of the pure solvent, Po solv, times the mole fraction of the solvent, Xsolv

p = Xsolv * Po sol

X solv = number of moles of solvent / number of moles of solution

The solvent is water and the solute (not volatile) is glycerin.

Number of moles = mass in grams / molar mass

mass of water = 132 ml * 1 g/ml = 132 g

molar mass of water = 18 g/mol

=> number of moles of water = 132 g / 18 g/mol = 7.33333 mol

mass of glycerin = 27.2 g

molar mass of glycerin:, C3H8O3: 3 * 12 g/mol + 8 * 1 g/mol + 3*16 g/mol = 92 g/mol

number of moles of glycerin = 27.2g / 92 g/mol = 0.29565

total number of moles = 7.33333 moles + 0.29565 moles = 7.62898 moles

=> X solv = 7.33333 / 7.62898 = 0.96125

=> p = 0.96125 * 31.8 torr ≈ 30.57 torr ≈ 30.6 torr.

Answer: 30.6 torr

[ad_2]

Categories
Assignment Help

A worker does 500 J of work on a 10 kg box.If the box transfers 375 J of heat to the floor through the friction between the box and the floor,what is the velocity of the box after the work has been done on it?

[ad_1]

The gravitational force Fg between two objects is given by the equation:

Fg=(G*m₁*m₂)/r₂, where G=6.67*10^-11 m³ kg⁻¹ s⁻² is the gravitational constant, m₁ and m₂ are the masses of the two bodies and r is the distance between those bodies. 

Due to the gravitational attraction the pencil and the eraser will attract if we there is no friction on the surface. 

m₁=10 g=0.01 kg is the mass of the pencil
m₂=20 g=0.02 kg is the mass of the eraser
r=2.5 cm = 0.025 m

First we calculate the Fg:

Fg={(6.67*10^-11)*0.01*0.02}/(0.025²)=2.1344*10^-11 N

To get the velocity v of the pencil:

v²=2as, where a is the acceleration of the pencil and s is the path. In our case s=r so we can write:

v²=2ar

a=Fg/m₁= 2.133*10^-9 m/s²

v²=2*(2.133*10^-9)*0.025=1.0665*10^-10

v=√(1.0665*10^-10)=1.0327*10^-5 m/s

We have the velocity and the acceleration, so we can calculate the time t with the equation:

t=v/a=(1.0327*10^-5)/(2.133*10^-9)=4841.6 s

1 hour has 3600 s so when we divide time t in seconds by 3600 we get time T in hours:

T=t/3600=4841.6/3600=1.3449 h. 

So the time for the pencil and eraser to touch is T=1.3449 hours. 

Also time T can be expressed like T= 1h and 20 mins and 41.64 s

[ad_2]

Categories
Assignment Help

Which characteristic of water allows its molecules to form hydrogen bonds? The water molecule is polar. Water has a low specific heat. Ionic bonds hold the water molecule together. Water expands as it freezes.

[ad_1]

Answer:

1) Water has very high specific heat.

2) It expands when it freezes

3) ability to dissolve in ionic substances

4) Water molecules at the surface experience fewer hydrogen bonds than water molecules within the liquid.

Explanation:

1) Water molecules due to their high specific heat , undergo relatively less increase in temperature after absorbing heat. So they prevent their adjoining area to experience sharp increase in temperature.

2) Water is an example which expands on freezing. In it , large spaces are left between molecules when it cools. It happens because hydrogen bonds prevent any two molecules to come very close thereby  creating gaps. This gap is filled up when ice melts , which results in overall reduction in volume of water.

3) Uneven distribution of charge results in water molecules becoming polar in nature . A polar substance  can be dissolved in polar solvents only.

4) It is due to property of surface tension. Property  of surface tension results due to molecules of water near the surface experiencing a  net downward  force due to hydrogen bonds . It is due to fewer hydrogen bonds made by them.

[ad_2]

Categories
Assignment Help

For an individual with an open fracture of the leg, what would be an appropriate action? A. Start CPR B. Apply heat C. Call 911 D. Keep the person walking

[ad_1]

1. The answer is “C”.

“Identical twins” who have been raised apart are typically more similar in intelligence level than biological siblings raised together because they have been born with the same genetic code.

Identical twins originate from a single fertilized egg that parts into two. Before it parts, it is either male or female. After it parts, there are either two guys or two females. The two sections of the fertilized egg embed in the uterus and every create one of the twins.  

Identical twins have the equivalent hereditary source. No immediate reason for monozygotic twinning has been resolved; it isn’t innate. Monozygotic twins speak to around 33% all things considered. They may look strikingly comparative, and it might be hard to reveal to them separated.

2. The answer is “A”.

Lawrence Kohlberg felt that one of the only ways individuals will accomplish the objectives in each of his six stages was to participate in “consensus democracy” in small group settings.

Lawrence Kohlberg felt that the best way to support development through these stages was by discourse of good problems and by investment in consensus democracy inside small groups. Consensus democracy was rule by understanding of the gathering, not larger part rule. This would invigorate and widen the reasoning of youngsters and grown-ups, enabling them to advance starting with one phase then onto the next.

3. The answer is “D.  showing a learner how to correct common mistakes”.

The term scaffolding alludes to a procedure in which instructors display or exhibit how to take care of an issue, and afterward venture back, offering support as required. Analyst and instructional architect Jerome Bruner first utilized the term ‘scaffolding’ in this setting, harking back to the 1960s. The hypothesis is that when understudies are given the help they require while discovering some new information, they stand a superior possibility of utilizing that learning freely. Bruner suggests positive association and three methods of portrayal amid educating: activities, pictures, and dialect.  

[ad_2]

Categories
Assignment Help

Which of the following changes would make a heat engine waste more energy as heat

[ad_1]

Answer:

1) Water has very high specific heat.

2) It expands when it freezes

3) ability to dissolve in ionic substances

4) Water molecules at the surface experience fewer hydrogen bonds than water molecules within the liquid.

Explanation:

1) Water molecules due to their high specific heat , undergo relatively less increase in temperature after absorbing heat. So they prevent their adjoining area to experience sharp increase in temperature.

2) Water is an example which expands on freezing. In it , large spaces are left between molecules when it cools. It happens because hydrogen bonds prevent any two molecules to come very close thereby  creating gaps. This gap is filled up when ice melts , which results in overall reduction in volume of water.

3) Uneven distribution of charge results in water molecules becoming polar in nature . A polar substance  can be dissolved in polar solvents only.

4) It is due to property of surface tension. Property  of surface tension results due to molecules of water near the surface experiencing a  net downward  force due to hydrogen bonds . It is due to fewer hydrogen bonds made by them.

[ad_2]

Categories
Assignment Help

What is energy? a change that appears in an object when force is applied the property of a body that gives it mass the amount of heat produced by a body the ability of an object to undergo change the ability of a body to move

[ad_1]

The gravitational force Fg between two objects is given by the equation:

Fg=(G*m₁*m₂)/r₂, where G=6.67*10^-11 m³ kg⁻¹ s⁻² is the gravitational constant, m₁ and m₂ are the masses of the two bodies and r is the distance between those bodies. 

Due to the gravitational attraction the pencil and the eraser will attract if we there is no friction on the surface. 

m₁=10 g=0.01 kg is the mass of the pencil
m₂=20 g=0.02 kg is the mass of the eraser
r=2.5 cm = 0.025 m

First we calculate the Fg:

Fg={(6.67*10^-11)*0.01*0.02}/(0.025²)=2.1344*10^-11 N

To get the velocity v of the pencil:

v²=2as, where a is the acceleration of the pencil and s is the path. In our case s=r so we can write:

v²=2ar

a=Fg/m₁= 2.133*10^-9 m/s²

v²=2*(2.133*10^-9)*0.025=1.0665*10^-10

v=√(1.0665*10^-10)=1.0327*10^-5 m/s

We have the velocity and the acceleration, so we can calculate the time t with the equation:

t=v/a=(1.0327*10^-5)/(2.133*10^-9)=4841.6 s

1 hour has 3600 s so when we divide time t in seconds by 3600 we get time T in hours:

T=t/3600=4841.6/3600=1.3449 h. 

So the time for the pencil and eraser to touch is T=1.3449 hours. 

Also time T can be expressed like T= 1h and 20 mins and 41.64 s

[ad_2]

Categories
Assignment Help

A 1.0 liter pot is filled with water at sea level and is brought to a boil. the same pot is filled with water at 5,000 feet above sea level and is brought to a boil. assuming the same heat is being applied to the pots and that they are filled with the same amount of water, which pot will boil faster and why?

[ad_1]

The gravitational force Fg between two objects is given by the equation:

Fg=(G*m₁*m₂)/r₂, where G=6.67*10^-11 m³ kg⁻¹ s⁻² is the gravitational constant, m₁ and m₂ are the masses of the two bodies and r is the distance between those bodies. 

Due to the gravitational attraction the pencil and the eraser will attract if we there is no friction on the surface. 

m₁=10 g=0.01 kg is the mass of the pencil
m₂=20 g=0.02 kg is the mass of the eraser
r=2.5 cm = 0.025 m

First we calculate the Fg:

Fg={(6.67*10^-11)*0.01*0.02}/(0.025²)=2.1344*10^-11 N

To get the velocity v of the pencil:

v²=2as, where a is the acceleration of the pencil and s is the path. In our case s=r so we can write:

v²=2ar

a=Fg/m₁= 2.133*10^-9 m/s²

v²=2*(2.133*10^-9)*0.025=1.0665*10^-10

v=√(1.0665*10^-10)=1.0327*10^-5 m/s

We have the velocity and the acceleration, so we can calculate the time t with the equation:

t=v/a=(1.0327*10^-5)/(2.133*10^-9)=4841.6 s

1 hour has 3600 s so when we divide time t in seconds by 3600 we get time T in hours:

T=t/3600=4841.6/3600=1.3449 h. 

So the time for the pencil and eraser to touch is T=1.3449 hours. 

Also time T can be expressed like T= 1h and 20 mins and 41.64 s

[ad_2]

Categories
Assignment Help

Poor, elderly, chronically ill, alcoholic, or obese persons are most often affected by which type of heat illness?

[ad_1]

Individuals eliminate alcohol from their bodies at an approximate rate of .015 BAL per hour. Correct answer: C Once alcohol has entered your bloodstream, your body will begin to metabolize it at a rate of 20 milligrams per deciliter (mg/dL) per hour. Despite the fact that alcohol is metabolized at a constant rate, some people may feel the effects of alcohol for longer amounts of time. The reason is because BAL is affected by several factors, like age, weight, medications…

[ad_2]

Categories
Assignment Help

[06.01]the same amount of heat is added to 100 g of water and 1 kg of water starting at the same temperature. what will happen?

[ad_1]

The equation for how temperature changes the resistance R is: 

R=R₀(1+α(T-T₀)), where R₀ is the resistance at T₀=20°C, T is the temperature for which we want to calculate the resistance and α is the temperature coefficient for resistance. 

The resistance of the copper wire increases by 18% or by 0.18, so the new value for the resistance is R=1.18*R₀.

T₀=20°C
=0.0068
R=1.18*R₀

Now we need to input that into the equation for resistance change and solve for temperature T.  

1.18R₀=R₀(1+α(T-20)), R₀ cancels out,

1.18=1+α(T-20),

1.18-1=α(T-20), we divide by α,

0.18/α=T-20, we put 20 on the left side,

26.47+20=T

T=46.47°C

So the temperature on which the resistance of copper wire will increase by 18% is T=46.47°C. 

[ad_2]

Categories
Assignment Help

How much heat is released when 75 g of octane is burned completely if the enthalpy of combustion is -5,500 kJ/mol C8H18

[ad_1]

How much heat is released when 75 g of octane is burned completely if the enthalpy of combustion is -5,500 kJ/mol C8H18

[ad_2]

Categories
Assignment Help

If a refrigerator is a heat pump that follows the first law of thermodynamics, how much heat was removed from food inside of the refrigerator if it released 204J of energy to the room? ______ Joules

[ad_1]

If a refrigerator is a heat pump that follows the first law of thermodynamics, how much heat was removed from food inside of the refrigerator if it released 204J of energy to the room? ______ Joules

[ad_2]

Categories
Assignment Help

A chef places sugar crystals in a cooking pan. He turns on the burner under the pan. In a few minutes, the sugar begins to melt. Which process is most directly responsible for transferring heat from the burner into the sugar? radiation convection conduction resonance

[ad_1]

A chef places sugar crystals in a cooking pan. He turns on the burner under the pan. In a few minutes, the sugar begins to melt. Which process is most directly responsible for transferring heat from the burner into the sugar? radiation convection conduction resonance

[ad_2]

Categories
Assignment Help

A scientist adds heat to each of the following substances. Which will probably absorb the most heat before its temperature changes significantly? 50 g of solid copper 50 g of solid iron 50 g of liquid water 50 g of sand Question 2(Multiple Choice Worth 2 points) A drop of water placed on a smooth, dry surface will form a dome-shaped droplet instead of flowing outward in different directions. Which of these best explains this observation? The bonds between hydrogen and oxygen atoms are very strong. The electrons in the atoms attract the electrons in the other atoms. Water molecules at the surface experience fewer hydrogen bonds than water molecules within the liquid. Water molecules near the surface produce more buoyant force than water molecules within the liquid. Question 3(Multiple Choice Worth 2 points) Which of these best explains what happens when the ionic substance calcium chloride (CaCl2) dissolves in water? The oxygen atoms in the water molecules are attracted to the Ca2+ ions. The oxygen atoms in the water molecules are attracted to the Cl− ions. The hydrogen atoms in the water molecules are attracted to the Ca2+ ions. The oxygen atoms in the water molecules are attracted to the H+ ions. Question 4(Multiple Choice Worth 2 points) Which of these statements about water is true? Its atoms share electrons equally. It can dissolve all known substances. Its molecules are farther apart in the solid state than in the liquid state. It has a lower specific heat than nearly all known metals.

[ad_1]

The gravitational force Fg between two objects is given by the equation:

Fg=(G*m₁*m₂)/r₂, where G=6.67*10^-11 m³ kg⁻¹ s⁻² is the gravitational constant, m₁ and m₂ are the masses of the two bodies and r is the distance between those bodies. 

Due to the gravitational attraction the pencil and the eraser will attract if we there is no friction on the surface. 

m₁=10 g=0.01 kg is the mass of the pencil
m₂=20 g=0.02 kg is the mass of the eraser
r=2.5 cm = 0.025 m

First we calculate the Fg:

Fg={(6.67*10^-11)*0.01*0.02}/(0.025²)=2.1344*10^-11 N

To get the velocity v of the pencil:

v²=2as, where a is the acceleration of the pencil and s is the path. In our case s=r so we can write:

v²=2ar

a=Fg/m₁= 2.133*10^-9 m/s²

v²=2*(2.133*10^-9)*0.025=1.0665*10^-10

v=√(1.0665*10^-10)=1.0327*10^-5 m/s

We have the velocity and the acceleration, so we can calculate the time t with the equation:

t=v/a=(1.0327*10^-5)/(2.133*10^-9)=4841.6 s

1 hour has 3600 s so when we divide time t in seconds by 3600 we get time T in hours:

T=t/3600=4841.6/3600=1.3449 h. 

So the time for the pencil and eraser to touch is T=1.3449 hours. 

Also time T can be expressed like T= 1h and 20 mins and 41.64 s

[ad_2]